Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
Before disassembling your S1 “New” Standard Magazine, make sure the magazine is completely unloaded and free of ammunition.
Turn the magazine upside down so the base plate is facing you.
On the bottom of the base plate, locate the “S” marking. In the center of the “S,” there is a built-in tool notch designed to help with disassembly.
Using a small punch, pick, or another pointed object, carefully press into the tool notch located in the middle of the “S” on the base plate.
Apply steady pressure to depress the internal locking tab.
While keeping pressure on the locking tab, slide the base plate forward and away from the magazine body.
Move slowly and maintain control of the base plate, as the spring inside the magazine is under tension.
Once the base plate clears the locking tab, carefully slide it completely off the magazine body.
Keep one hand over the bottom of the magazine to prevent the spring and internal components from releasing suddenly.
With the base plate removed, slowly release spring tension.
Carefully pull the spring and follower assembly out of the magazine body.
Once disassembled, you may inspect or clean the magazine body, follower, spring, and base plate.
Do not use harsh chemicals or excessive force on any component.
To reassemble, insert the follower and spring back into the magazine body in the same orientation they were removed.
Compress the spring carefully, then slide the base plate back onto the bottom of the magazine body until it locks securely into place.
Before use, confirm the base plate is fully seated and locked.
Always verify that the magazine is unloaded before disassembly, cleaning, inspection, or maintenance. Use caution when removing the base plate, as the internal spring is under tension.
Certain U.S. states, territories, municipalities, and local jurisdictions restrict the sale, transfer, possession, shipment, or receipt of firearm magazines, magazine components, firearm accessories, parts, and related equipment. These restrictions may include magazine capacity limits, accessory restrictions, age and identity verification requirements, documentation requirements, and shipping limitations.
Advanced Tactical Firearms does not process, approve, complete, or knowingly ship any order prohibited by federal, state, local, or municipal law. Customers, dealers, distributors, resellers, and any intermediary parties are solely responsible for ensuring that any purchase, sale, transfer, receipt, resale, or distribution of Advanced Tactical Firearms products complies with all applicable laws and regulations in the destination jurisdiction.
If an item is shipped to a receiving party and the intended sale, transfer, possession, or receipt is prohibited by law, the receiving party must immediately return the item to Advanced Tactical Firearms for review and refund processing, subject to company policy and applicable law.
Any dealer, distributor, reseller, or intermediary party selling or transferring Advanced Tactical Firearms products to an end user is exclusively responsible for verifying that the end user is legally permitted to purchase, receive, possess, or use the product in the applicable jurisdiction.
Certain exemptions may apply for active law enforcement, military personnel, government agencies, licensed dealers, or other specifically authorized persons, depending on applicable law. Customers attempting to purchase under a qualified exemption must contact Advanced Tactical Firearms prior to placing an order and must provide all required documentation for review. Advanced Tactical Firearms reserves the right to refuse, cancel, or delay any order pending compliance review.
No restricted product will be shipped where prohibited by law. Warranty replacements, exchanges, or replacement shipments for restricted products may also be prohibited in certain jurisdictions and will not be processed where restricted by applicable law.
The following list is provided for general informational purposes only and may not include every applicable restriction. Laws change frequently, and customers remain solely responsible for confirming the legality of their purchase, possession, transfer, and receipt of any product in their jurisdiction.
California
Prohibits magazines over 10 rounds and restricts certain firearm accessories, components, parts, and equipment. Additional California-specific requirements may apply.
Colorado
Prohibits magazines over 15 rounds.
Connecticut
Prohibits magazines over 10 rounds. Purchases of magazines of any capacity may require verification and supporting documentation.
Delaware
Prohibits magazines over 17 rounds.
Hawaii
Prohibits magazines over 10 rounds.
Illinois
Restricts certain firearm magazines, firearm accessories, grips, stocks, barrel shrouds, and related components. Illinois restrictions may vary by firearm type and local jurisdiction.
Maryland
Prohibits magazines over 10 rounds.
Massachusetts
Prohibits magazines over 10 rounds.
New Jersey
Prohibits magazines over 10 rounds. Purchases of magazines of any capacity may require verification.
New York
Prohibits magazines over 10 rounds.
Oregon
Prohibits magazines over 10 rounds, subject to the status and enforcement of applicable law.
Rhode Island
Prohibits magazines over 10 rounds.
Vermont
Prohibits rifle magazines over 10 rounds and handgun magazines over 15 rounds.
Virginia
Restricts certain magazines and firearm accessories. Additional Virginia-specific requirements may apply.
Washington
Prohibits magazines over 10 rounds.
Certain local governments also restrict magazine capacity and/or firearm accessories. Local restrictions may apply even where state law is less restrictive. Local laws are not listed here where state law is already more restrictive.
Washington, D.C.
Prohibits magazines over 10 rounds.
Aurora, Illinois
Prohibits magazines over 15 rounds.
Cook County, Illinois
Prohibits magazines over 10 rounds.
Deerfield, Illinois
Prohibits rifle magazines over 10 rounds.
Highland Park, Illinois
Prohibits rifle magazines over 10 rounds.
Highwood, Illinois
Prohibits rifle magazines over 10 rounds.
North Chicago, Illinois
Prohibits magazines over 16 rounds of centerfire ammunition.
University Park, Illinois
Prohibits rifle magazines over 10 rounds.
Buffalo, New York
Restricts certain rifle and shotgun magazines.
Rochester, New York
Restricts certain rifle and shotgun magazines.
Connecticut restricts magazines over 10 rounds. Customers purchasing magazines of any capacity may be required to provide supporting documentation before an order can be processed.
Connecticut customers may be required to provide:
Advanced Tactical Firearms will not process Connecticut orders requiring verification until all required documentation has been reviewed and approved.
California law imposes restrictions and compliance requirements affecting certain firearm accessories, components, parts, and equipment. These requirements may include age verification, identity verification, customer acknowledgment requirements, and strict shipping requirements related to the sale and delivery of firearm accessories, firearm parts, and equipment capable of producing firearm components.
Advanced Tactical Firearms is reviewing and updating its compliance procedures to meet applicable California requirements.
Effective immediately, Advanced Tactical Firearms may suspend, cancel, or refuse orders of restricted or designated products destined for California unless and until the order can be verified as legally compliant. Customers are responsible for ensuring that any product ordered, received, or possessed in California is lawful under all applicable state and local laws.
Advanced Tactical Firearms will update this notice as compliance requirements, product eligibility, or shipping restrictions change.
Virginia law imposes restrictions and compliance requirements affecting certain firearm accessories, components, parts, and equipment. These requirements may include age verification, identity verification, customer acknowledgment requirements, and strict shipping requirements related to the sale and delivery of firearm accessories, firearm parts, and related equipment.
Advanced Tactical Firearms is reviewing and updating its compliance procedures to meet applicable Virginia requirements.
Effective immediately, Advanced Tactical Firearms may suspend, cancel, or refuse orders of restricted firearm accessories, components, parts, or related equipment destined for Virginia unless and until the order can be verified as legally compliant. Customers are responsible for ensuring that any product ordered, received, or possessed in Virginia is lawful under all applicable state and local laws.
Advanced Tactical Firearms will update this notice as compliance requirements, product eligibility, or shipping restrictions change.
This policy is provided for general informational and compliance purposes only and does not constitute legal advice. Firearm laws and accessory restrictions change frequently and may vary by state, county, city, municipality, or customer status. Customers, dealers, distributors, and resellers should consult qualified legal counsel or the appropriate government authority to confirm the legality of any purchase, sale, transfer, shipment, receipt, possession, or use of Advanced Tactical Firearms products.
Advanced Tactical Firearms reserves the right to refuse, cancel, suspend, or delay any order at its sole discretion if compliance concerns exist or if additional documentation is required.
Certain products, components, accessories, software, technology, technical information, documentation, services, and related materials sold, provided, disclosed, or otherwise made available by Advanced Tactical Firearms may be subject to the Export Administration Regulations, 15 C.F.R. Parts 730–774, administered by the U.S. Department of Commerce, Bureau of Industry and Security. Such items may be classified under the Commerce Control List or otherwise subject to U.S. export-control restrictions, including license requirements, destination restrictions, end-user restrictions, end-use restrictions, reexport controls, and transfer limitations.
As a material condition of purchasing, receiving, accessing, possessing, or using any goods, software, technology, technical information, services, or related materials from Advanced Tactical Firearms, the customer acknowledges and agrees that the export, reexport, release, disclosure, shipment, transfer, diversion, resale, or other disposition of such items, directly or indirectly, contrary to U.S. law or any other applicable export-control law is strictly prohibited.
The customer shall not export, reexport, transfer, release, disclose, resell, divert, or otherwise provide any Advanced Tactical Firearms product, software, technology, technical information, service, or related material to any foreign person, foreign entity, foreign destination, restricted party, sanctioned party, prohibited end user, or for any prohibited end use, unless and until all required U.S. and non-U.S. government authorizations, licenses, approvals, exemptions, or exceptions have been obtained.
The customer is responsible for determining and complying with all export-control requirements applicable to any subsequent export, reexport, transfer, resale, release, disclosure, or use of items acquired from Advanced Tactical Firearms. Advanced Tactical Firearms reserves the right to refuse, suspend, cancel, or condition any transaction where export-control, sanctions, licensing, end-use, end-user, destination, or diversion concerns are identified.
Certain products, components, accessories, technical data, defense articles, defense services, software, documentation, training, and related materials sold, provided, disclosed, or otherwise made available by Advanced Tactical Firearms may be subject to the International Traffic in Arms Regulations, 22 C.F.R. Parts 120–130, administered by the U.S. Department of State, Directorate of Defense Trade Controls. Such items may be listed on, described by, or otherwise controlled under the United States Munitions List and may require prior authorization before export, temporary import, reexport, retransfer, release, disclosure, or provision to a foreign person or foreign destination.
As a material condition of purchasing, receiving, accessing, possessing, or using any ITAR-controlled goods, technical data, defense articles, defense services, software, documentation, training, or related materials from Advanced Tactical Firearms, the customer acknowledges and agrees that any export, reexport, retransfer, release, disclosure, shipment, transfer, diversion, resale, or other disposition of such items, directly or indirectly, in violation of U.S. law is strictly prohibited.
The customer shall not provide, disclose, release, export, reexport, retransfer, resell, divert, or otherwise make available any ITAR-controlled Advanced Tactical Firearms item, technical data, defense article, defense service, software, documentation, training, or related material to any foreign person, foreign entity, foreign destination, restricted party, sanctioned party, prohibited end user, or for any prohibited end use, unless specifically authorized under applicable law.
The customer is responsible for obtaining any required U.S. or foreign government authorization, license, approval, exemption, or other permission necessary for the customer’s export, reexport, retransfer, release, disclosure, resale, transfer, or use of ITAR-controlled items acquired from Advanced Tactical Firearms. Advanced Tactical Firearms may require end-use statements, end-user certifications, destination information, restricted-party screening information, license documentation, or other compliance records before accepting, processing, shipping, or completing any transaction.
By purchasing, receiving, accessing, possessing, or using any product, component, accessory, software, technology, technical data, service, documentation, training, or related material from Advanced Tactical Firearms, the customer represents, warrants, and certifies that it will comply with all applicable U.S. and non-U.S. export-control, sanctions, customs, import, and trade-compliance laws and regulations, including, as applicable, the Export Administration Regulations, the International Traffic in Arms Regulations, and regulations administered by the U.S. Department of the Treasury’s Office of Foreign Assets Control. OFAC administers and enforces U.S. economic and trade sanctions programs based on U.S. foreign policy and national security objectives.
The customer further represents and warrants that it is not, and is not acting on behalf of, any restricted, denied, debarred, blocked, or sanctioned party, and that it will not use, transfer, export, reexport, retransfer, resell, release, disclose, or divert any Advanced Tactical Firearms item in a manner that would violate applicable law or cause Advanced Tactical Firearms to violate applicable law.
The customer agrees to maintain accurate records relating to its receipt, use, transfer, export, reexport, retransfer, resale, or disposition of Advanced Tactical Firearms products, technical data, software, services, and related materials, and to provide such records to Advanced Tactical Firearms upon reasonable request where necessary to support export-control, sanctions, licensing, end-use, end-user, or regulatory compliance.
The customer agrees to indemnify, defend, and hold harmless Advanced Tactical Firearms, its officers, directors, employees, agents, representatives, successors, and assigns from and against any and all claims, penalties, fines, liabilities, losses, damages, costs, and expenses, including reasonable attorneys’ fees, arising out of or related to the customer’s breach of this clause or violation of any applicable export-control, sanctions, import, customs, or trade-compliance law.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.